Single Line Join Form from AQB Soft

Hello everybody.
This is a support forum for our Single Line Join Form module.
If you have some questions or suggestions regarding it feel free to post them here or contact us directly.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 24 Apr 2014

I love this idea.  Could this work with 7.0.9?

Quote · 24 Apr 2014

Hello 

I love this idea.  Could this work with 7.0.9?

Currently the module is available for Dolphin 7.1.x only. But we plan to create it for Dolphin 7.0.x too.
Please wait. :)

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 25 Apr 2014

You show 2 screen shots for the single line sign up. Does that mean new members need to click on 'join now' twice before joining? Will the following show on 1 single line: Username, Email, Password, Date of Birth, Country > Join

Quote · 25 Apr 2014

Hello 

You show 2 screen shots for the single line sign up. Does that mean new members need to click on 'join now' twice before joining? Will the following show on 1 single line: Username, Email, Password, Date of Birth, Country > Join

The module uses default Dolphin's Profile Fields builder to organize fields in join form. So, you may create any number of steps and the next step will be loaded when visitor clicks 'Join Now' on the current one.

You may create a join form with only 3 fields Username, Email and Password. In this case you don't need to have multiple steps.

Theoretically you may have 5 fields and only one step but they won't fit in one line. Default Dolphin's page width is to small to fit 5 fields in one line.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 25 Apr 2014

Is this possibile to put member in a popup which will be shown each time the member logged in while he won't fill the fields completely?
 Member should fill in all fields (depended of profile type) not only mandatory fields.
Is this possibile to do that? 

Quote · 10 May 2014

Hello 

Is this possibile to put member in a popup which will be shown each time the member logged in while he won't fill the fields completely?
 Member should fill in all fields (depended of profile type) not only mandatory fields.
Is this possibile to do that? 

As I already wrote above the module uses default Dolphin's profile fields builder. So, there is no way to ask that all fields should be filled in but in the same time they are not mandatory.

However I think your idea can be realized without any custom modifications but using mandatory fields. You may do the following:

1. You may mark all necessary fields as mandatory and display all of them on Profile Edit page.
2. Display only basic fields (for example, Username, Email, Password) on Join Form.

In this case user will be able to easily join by filling in a short join form, but notification popup will appear after each login until he doesn't fill in all profile fields.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 12 May 2014

OK. You are right.

One more question: is there a possibility to have any animation on those basic forms (div.aqb-jf-form-cnt)? Any: width transition, fade transform, slide or sth. else... I mean that effect after "submit" btn.

Unfortunately that is not possibile to display this effect with css3 - no way. But this is very easy with f.ex. jquery, but how? Maybe somethong like this:

$('#button').click(function () { $('.box').toggleClass('change-width'); }); 

...and where attach that code - in your main.js? Of course it can be fade effect - width is only an example.

Quote · 13 May 2014

Hello 

OK. You are right.

One more question: is there a possibility to have any animation on those basic forms (div.aqb-jf-form-cnt)? Any: width transition, fade transform, slide or sth. else... I mean that effect after "submit" btn.

Unfortunately that is not possibile to display this effect with css3 - no way. But this is very easy with f.ex. jquery, but how? Maybe somethong like this:

$('#button').click(function () { $('.box').toggleClass('change-width'); }); 

...and where attach that code - in your main.js? Of course it can be fade effect - width is only an example.

Yes, you may use something like this in main.js file. But the exact code and the place where it should be added are depend on the effect you want to realize.
P.S. The module submits each step of join form using ajaxSubmit. You may find the code in main.js file -> AqbJfMain::validateJoinForm method.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 13 May 2014

Great. 

I will@

Quote · 13 May 2014

 Hello

Great. 

I will@

Good luck!!! :) 

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 14 May 2014

I installed it but it continues to say

The number of fields on a step exceeds limit

i changed it to 2 and even 1 and it still says the same

The number of fields on a step exceeds limit
Read more at http://queloquepasa.com/index.php#HwWjrbclaUbtkZts.99
Everyday is a new beginning.
Quote · 20 May 2014

 Hello

I installed it but it continues to say

The number of fields on a step exceeds limit

i changed it to 2 and even 1 and it still says the same

The number of fields on a step exceeds limit
Read more at http://queloquepasa.com/index.php#HwWjrbclaUbtkZts.99

I checked your site and as I see the problem with fields counter was figured out. Feel free to contact us if you need some help.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 21 May 2014

Got it sweet!

Everyday is a new beginning.
Quote · 21 May 2014

I just bought it and the number still say ''THE NUMBER OF FIELDS ON A STEP EXCEEDS LIMIT''

Very strange that everybody have the same problem. And you still sending the same files that not working.

And if i trying to change the number of fields, after the saving it goes back to 3 as default. It's not working to save the number of fields.

Quote · 11 Jul 2014

Hello 

I just bought it and the number still say ''THE NUMBER OF FIELDS ON A STEP EXCEEDS LIMIT''

Very strange that everybody have the same problem. And you still sending the same files that not working.

And if i trying to change the number of fields, after the saving it goes back to 3 as default. It's not working to save the number of fields.

The module displays the warning to everybody just after the installation because by default Dolphin has TOO many profile fields in join form. You just need to reduce their number using standard Dolphin's Profile Fields builder view admin panel -> builders -> profile fields -> join form.

P.S. Looks like you've tried to change the value of the limit itself in module's admin panel but you need to change the number of fields to meet this limit.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 11 Jul 2014

The number of fields on a step exceeds limit

same error I have noticed, I am not developer can you advice,

singlelike form error.PNG · 402K · 300 views
Quote · 28 Aug 2014

 Hello

The number of fields on a step exceeds limit

same error I have noticed, I am not developer can you advice,

The module displays the warning to everybody just after the installation because by default Dolphin has TOO many profile fields in join form. You just need to reduce their number using standard Dolphin's Profile Fields builder view admin panel -> builders -> profile fields -> join form. Note, you don't need to be a developer because it can be easily done via Dolphin's administration panel.

P.S. I did it for you via provided Dolphin's admin panel access info. Check it please. :)

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 29 Aug 2014

Hi,

I`ve just installed the module, and it doesn`t work right for me. I get the "limit fields" error too. I do understand how to set up the registration profile fields for this to work, but the problem is that there are no steps created.If i enter 3 fields per step, it will work if the registration form has no more than 3 fields, but if there are 4+ fields it will fail.No matter what and how I try to organize the fields, in the same block in another block, it will fail when: "total amounts of fields > then set step" no matter how there organized.

I can`t see why it fails ?

Am I right that the next step needs a new block with fields, or does it not matter at all, if the next fields are in the same block. No matter how I organize the fields, blocks are ignored anyway, it shows as many fields as set as step-limit on the form, no matter what block there in. Seems to ignore blocks in this case.

Is there someting im missing ? Or any suggestion why creating steps fails.

(A very quick signup with only one step, would be great, but not a good idea without captcha. After the install I set it up first with just that setting, and had a signup with dozens of bots/spammers within in minutes! :-o So at least a step with captcha is essential.)

Quote · 31 Aug 2014

 Hello

Hi,

I`ve just installed the module, and it doesn`t work right for me. I get the "limit fields" error too. I do understand how to set up the registration profile fields for this to work, but the problem is that there are no steps created.If i enter 3 fields per step, it will work if the registration form has no more than 3 fields, but if there are 4+ fields it will fail.No matter what and how I try to organize the fields, in the same block in another block, it will fail when: "total amounts of fields > then set step" no matter how there organized.

I can`t see why it fails ?

Am I right that the next step needs a new block with fields, or does it not matter at all, if the next fields are in the same block. No matter how I organize the fields, blocks are ignored anyway, it shows as many fields as set as step-limit on the form, no matter what block there in. Seems to ignore blocks in this case.

Is there someting im missing ? Or any suggestion why creating steps fails.

(A very quick signup with only one step, would be great, but not a good idea without captcha. After the install I set it up first with just that setting, and had a signup with dozens of bots/spammers within in minutes! :-o So at least a step with captcha is essential.)
  1. You are right you need to use a separate block for each step. 
  2. Each block should have number of fields which is less than specified limit.
  3. Each block should be associated with new 'Join Page'. Try to view block's settings and you'll see 'Join Page' parameter. So, the first block should have 0, the second - 1, the third - 2, etc.
Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 1 Sep 2014

Thanks a lot, thats it! I just didn`t see that setting for the blocks. I also have a kind of wrong translation to my german where its named "join the community", think thats why i didnt recognize it at all.

Awesome Support, Like your Mods/Modules. Keep up the good work.

Greetings form Switzerland

Oli

Quote · 1 Sep 2014

 Hello

Thanks a lot, thats it! I just didn`t see that setting for the blocks. I also have a kind of wrong translation to my german where its named "join the community", think thats why i didnt recognize it at all.

Awesome Support, Like your Mods/Modules. Keep up the good work.

Greetings form Switzerland

Oli

You are welcome! :)
P.S. We'll do our best!!!

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 2 Sep 2014

hi,

is it possible that after i join and fill all the single line fields and also fill all the fields in the popup after and press the  save button it will stay on the avatar page instead of leaving to  edit page?

Always remember that the future comes one day at a time.
Quote · 24 Mar 2015

Hello 

hi,

is it possible that after i join and fill all the single line fields and also fill all the fields in the popup after and press the  save button it will stay on the avatar page instead of leaving to  edit page?

Unfortunately it's not available in the current version.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 24 Mar 2015

hi, i have installed the module and its greate

but somehow another join link add to the page so its looks like: Join · Join · Login

i checked Enable Notification Popup About Empty Profile Fields 

and nothing is pooping out even if some mandatory fileds not completed

Always remember that the future comes one day at a time.
Quote · 27 Mar 2015

Hello 

hi, i have installed the module and its greate

but somehow another join link add to the page so its looks like: Join · Join · Login

i checked Enable Notification Popup About Empty Profile Fields 

and nothing is pooping out even if some mandatory fileds not completed

1. You may hide the old 'Join' link via Dolphin's admin panel -> Builders ->  Service Menu.

2. May be you have some customization related to Join process which can prevent popup displaying. I need to take a look to be able to give you an answer.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 27 Mar 2015

Thanks, i removed the second join.

I sent you link to my site, user and password (administrator)

in p.m.

 

Thank you.

Always remember that the future comes one day at a time.
Quote · 28 Mar 2015

Hello

Thanks, i removed the second join.

I sent you link to my site, user and password (administrator)

in p.m.

 

Thank you.

OK, will check it.
You are welcome! :) 

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 30 Mar 2015

hi, i upgraded to 7.2 and its not showing the fields nor error

Always remember that the future comes one day at a time.
Quote · 21 Sep 2015

Hello 

hi, i upgraded to 7.2 and its not showing the fields nor error

Thank you for the report. We'll check it an let you know. 

Please wait.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 21 Sep 2015

Hello everybody.

The module was updated. Now it's fully compatible with Dolphin 7.2.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 22 Sep 2015

ivd uninstall previous installation. uploaded the new one from 7.2 dir and install . then got this message:

 

Installation of: Single Line Join Form Failed

 

 

-- Check the Dolphin version for compatibility: The module is not compatible with your version of Dolphin script
Always remember that the future comes one day at a time.
Quote · 23 Sep 2015

Hello 

ivd uninstall previous installation. uploaded the new one from 7.2 dir and install . then got this message:

 

Installation of: Single Line Join Form Failed

 

 

-- Check the Dolphin version for compatibility: The module is not compatible with your version of Dolphin script

I just rechecked the uploaded package and it has correct files in "for Dolphin 7.2.x" folder. Could you please recheck whether the module's files were correctly updated on your site.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 23 Sep 2015

i checked it. the old one deleted and the new one uploded.

still get this error

Always remember that the future comes one day at a time.
Quote · 24 Sep 2015

 Hello

i checked it. the old one deleted and the new one uploded.

still get this error

Could you please provide me via PM with the access info for your site. I need it to investigate the issue.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 24 Sep 2015

 just did

 Hello

i checked it. the old one deleted and the new one uploded.

still get this error

Could you please provide me via PM with the access info for your site. I need it to investigate the issue.

 

Always remember that the future comes one day at a time.
Quote · 25 Sep 2015

hi, in mobile. the popup form (don't forget..) not responsive and out of scale,the join fields shrink down its looks like blank little bricks. 

Always remember that the future comes one day at a time.
Quote · 27 Sep 2015

Hello 

hi, in mobile. the popup form (don't forget..) not responsive and out of scale,the join fields shrink down its looks like blank little bricks. 

Thank you for the report. The issue was fixed and the package was updated. If you don't want to reinstall the module you just need to update the following files from the package and clear cache if you have it enabled.

1. classes/AqbJfTemplate.php

2. templates/base/css/join_tablet.css

3. templates/base/css/join_phone.css

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 28 Sep 2015

hi, the don't forget pop up form still out of scale in mobile. too large

i think its a dolphin error, not so sure..

Always remember that the future comes one day at a time.
Quote · 28 Sep 2015

Hello 

hi, the don't forget pop up form still out of scale in mobile. too large

i think its a dolphin error, not so sure..

Thank you for your GREAT help in testing!!! And sorry for inconvenience. The issue was fixed and the package was updated. If you don't want to reinstall the module you just need to update the following files from the package and clear cache if you have it enabled.

1. classes/AqbJfTemplate.php

2. templates/base/notifier_cnt.html

3. templates/base/css/notifier_tablet.css

4. templates/base/css/notifier_phone.css

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 29 Sep 2015

its says that its compatible for dol 7.3.3 

but the folders inside the archive is 7.1 & 7.2 only

Always remember that the future comes one day at a time.
Quote · 13 Nov 2016

Hello 

its says that its compatible for dol 7.3.3 

but the folders inside the archive is 7.1 & 7.2 only

You need to use the latest available version, the version which is created for Dolphin 7.2. It's compatible with Dolphin 7.3.x too. I just updated the packge, now the folder named "for Dolphin 7.2.x and higher". Thank you for the report.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 14 Nov 2016

Hello,

 

i have installed the modules, and the Fields are not width enough, over the half the box are empty , and the fields are not complete width

 

Greetings

Andre

Quote · 23 Nov 2016

Hello 

Hello,

 

i have installed the modules, and the Fields are not width enough, over the half the box are empty , and the fields are not complete width

 

Greetings

Andre

In this case you may:

1. Activate more fields or move the block in narrow column.

2. Customize the fields' width via modules/aqb/join_form/templates/base/css/join.css CSS file.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 23 Nov 2016
 
 
Below is the legacy version of the Boonex site, maintained for Dolphin.Pro 7.x support.
The new Dolphin solution is powered by UNA Community Management System.